Roland CAMM-1 GX-400
Roland CAMM-1 GX-400
Roland CAMM-1 GX-400
Roland CAMM-1 GX-400

Roland CAMM-1 GX-400

USD 2,160.00
Brand:
Product Code: RPN121125
Availability: In Stock
Viewed 285 times

Product Description

Roland CAMM-1 GX-400

Combining precision and performance with Roland's legendary reliability, the CAMM-1 Pro GX-400 vinyl cutter is the ideal choice for contour cutting a wide range of materials, including vinyl, heat transfers, and printed graphics. With speed, accuracy, and powerful downforce, it delivers outstanding results for high-quality signs, apparel, vehicle graphics, and more.
Cutting Method Media-movement method
Driving Method Digital control servo motor
Maximum Cutting Area 39 x 984-1/8" (1000 x 24,998 mm)
Acceptable Media Width 3-1/2 to 46" (90 to 1178 mm)
Maximum Cutting Speed 33.5 in/sec (850 mm/sec) in all directions
Tool-Up Speed 47 in/sec (1202 mm/sec) in 45º direction
Cutting Force 20 to 350 gf
Mechanical Resolution 0.000137"/step (0.0035 mm/step)
Software Resolution 0.000984"/step (0.025 mm/step)
Distance Accuracy Error of less than 0.2% of distance traveled, or 0.00394" (0.1 mm), whichever is greater
Repetition Accuracy 0.1 mm or less (excluding stretching/contraction of the material)
Interface Serial (RS-232C-compatible), USB (Rev 1.1)
Buffer Size 2 MB (total buffer size: 8 MB)
Power Supply AC 100V to 240V ±10% 50/60Hz 1.1A
Power Consumption Approx. 100W
Acoustic Noise Level Cutting mode: under 62 dB (A); Standby mode: under 40 dB (A) (ISO 7779)
Dimensions with Stand 55-3/8"(W) x 28-5/8"(D) x 43-13/16"(H) (1407 x 727 x 1113 mm)
Weight with Stand 112.4 lb (51 kg)
Operating Temperature 41 to 104°F (5 to 40°C)
Operating Humidity 35 to 80% (non-condensing)
Standard Accessories Power cord, blade holder (XD-CH2), pin, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM (CutStudio design software, plug-ins for CorelDraw and Adobe Illustrator), setup guide, user manual.